Wood
	Thermal ash	Durability class 1 - 2
		European wood, whose durability has been thermally increased. By the thermo-treatment the ash gets a dark colour. To avoid that the wood turns grey, thermo-ash must be treated with douglas fir oil.
	Almendrillo FSC	Durability class 2
		Almendrillo is a permanent and longliving wood. It belongs to the leightweight wood types and has partly a bright, magnificent „flame design“. Almendrillo FSC comes from a special FSC production in South America where it is already treated with oil. For its further treatment you can use Bangkirai oil and douglas fir oil.
	Ipé	Durability class 1
		Ipé, also called Ironwood, is a heavy and very hard wood from South America. The wood has fine pores, is quite free from marks and cracks, is resistant to shocks and abrasion and almost unsplitting. Natural ingredients protect the wood against decomposition, rot and fungal or insect attacks. The colour of Ipé heartwood varies in fresh condition from light brown to chartreuse. By influence of light and air the surface darkens to brown or olive brown. The direct contact with water and ground is possible. For its treatment we recommend Bangkirai oil.
	Bangkirai	Durability class 2
		An extremely resitant hardwood from Malaysia and Indonesia, which is almost free from branches and imperfect points. Bangkirai is perfect for the use in outer areas, e.g. for terraces, fences or pergolas. The direct contact with water or ground is possible. After its installation we recommend a treatment with Bangkirai oil.
	Garapa KD	Durability class 1 - 2
		Garapa is a South American hardwood with natural resistance against rot and fungal or insect attack. The light brown, even wood weighs approx. 800 - 960 kg/m ². Pinholes (holes of vermin) are very rare. The particularity of Garapa is that it is already dried and therefore very stable in its form. Garapa is convenient for the construction of terraces and balconies, gardens and paths, fences etc. A direct contact with the ground should be avoided. For the first treatment and its further care we recommend douglas fir oil.
	Siberian Larch	Durability class 2 - 3
	Local Larch	Durability class 3
		A coniferous wood from the mountains of Central Europe, which is very resistant both in dry and in humid condition. Can be used without impregnation. Gall bladders are unavoidable. Not convenient for direct contact with the ground. Is used for the construction of terraces, balconies and gardens. For the first treatment and its further care we recommend douglas fir oil.
	Douglas fir	Durability class 3 - 4
		This coniferous wood grows rapidly and is from our local forests. Its wood contents make the douglas fir very resistant against fungal and insect attacks. The direct contact with the ground should be avoided. It is used for the construction of terraces, balconies, gardens and paths, fences etc. For the first treatment and its further care we recommend douglas fir oil.
	Kapur	Durability class 2
		Kapur comes from Southeast Asia and is - like Bangkirai - very stable, but possibly with small wormholes. Kapur is slightly red brown to dark, sometimes with very small, white stripes. As it is also the case for Bangkirai and Masseranduba, it is possible that the wood ingredients are leaking. However, this can mostly be avoided by waxing. Kapur is always well dried and examined by special quality inspectors. For its care we recommend Bangkirai oil.
	Wolwax
		Nordic pine which grows slower than our local pines. The wood is more dense and stable in its form. If this wood is treated accordingly it can perfectly been used for terrace coverings. The boiler pressure impregnation is made according to the strict regulations of the RAL quality association. By applying the water-repellent preservative Wolwax the humidity enters and leaves the wood more slowly. Due to this additional protection the wood is very stable in its form and has less cracking. This emulsion should be re-applied from time to time.
	Decodeck terrace system
		Decodeck is a terrace system with extremely resistant, waterproof components. It is a homogeneous mixture of wood and plastic what makes the material very special. Decodeck can be worked with usual wood tools.